Valve Body and Oil Pump Assembly - With AXOD-E (AX4S)

WITH AXOD-E (AX4S)

DISASSEMBLE

Oil Pump From Valve Body Removal:

1. Remove two oil pump to valve body attaching bolts.
2. Separate valve body from oil pump and remove gasket.

ASSEMBLE
1. Position valve body on oil pump using a new gasket.

Oil Pump To Valve Body Installation:

2. Install oil pump guide pins tool No. T86P-70370-A and valve body guide pin tool No. T86P-70100-C or equivalent as shown in the Oil Pump To Valve Body Installation image.
3. Install two valve body to oil pump attaching bolts. Tighten bolts.