Evaporative Emission Control Canister: Service and Repair

REMOVAL
^ Raise vehicle on hoist.
^ Remove fuel vapor canister bracket-to-radiator support retaining bolt and partially lower fuel vapor canister and fuel vapor canister bracket.
^ Disconnect fuel vapor hose from fuel vapor canister.
^ Remove fuel vapor canister bracket-to-fuel vapor canister bolt and separate fuel vapor canister from fuel vapor canister bracket, if required.

INSTALLATION
^ To install, reverse removal procedure. Tighten fuel vapor canister bracket-to-fuel vapor canister retaining bolt to 5.2-7.2 Nm (46-63 in lb). Tighten fuel vapor canister bracket-to-radiator support retaining bolt to 21.2-28.8 Nm (15-21 ft lb).