Inflator Solenoid, Level Control

The air spring solenoid valve allows air to enter and exit the air spring during leveling. The valve is electrically operated and is controlled by the module. The air spring solenoid valve is completely air tight, therefore the air lines are not required to be air tight. The air lines only contain pressurized air during vent and compress operations.

The valve is a two-stage pressure relief system. A clip is removed and rotation of the solenoid out of the seat will release air from the spring before the solenoid can be removed. Never rotate an air spring solenoid valve to the release slot in the end fitting until all of the pressurized air has escaped the system.