PFE Sensor - MIL ON/DTC 332 Stored in Memory

Article No.
96-25-9

12/02/96

^ MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION - DIAGNOSTIC TROUBLE CODE (DTC) 332 STORED IN MEMORY - WATER PRESENT IN PRESSURE FEEDBACK EGR (PFE) SENSOR

^ LAMP - MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION - DIAGNOSTIC TROUBLE CODE (DTC) 332 STORED IN MEMORY - WATER PRESENT IN PRESSURE FEEDBACK EGR (PFE) SENSOR

FORD:
1992-94 CROWN VICTORIA

LINCOLN-MERCURY:
1992-94 GRAND MARQUIS

ISSUE:
A Diagnostic Trouble Code (DTC) 332 and/or Malfunction Indicator Lamp (MIL) illumination may occur on some vehicles. This may be caused by a faulty Pressure Feedback EGR (PFE) sensor. Some vehicles may also show signs of water present in the PFE sensor or sensor port. This condition is a normal result of the combustion process and no action should be taken if the only concern is presence of water.

ACTION:
Perform normal diagnostics as outlined in the appropriate year Powertrain Control/Emissions Diagnosis (PC/ED) Service Manual to determine if the PFE sensor needs replacing. If test results show the PFE sensor needs replacing, replace the PFE Sensor (F4AZ-9J433-AA).

PART NUMBER PART NAME

F4AZ-SJ433-AA Pressure Feedback EGR (PFE) Sensor

OTHER APPLICABLE ARTICLES: NONE

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage And Emissions Warranty Coverage

OPERATION DESCRIPTION TIME

962509A Replace Pressure 0.3 Hr.
Feedback EGR (PFE)
Sensor

DEALER CODING
CONDITION
BASIC PART NO. CODE
9J433 08

OASIS CODES: 204100, 206000, 698298