DD7 DTC 63 Check Pump Motor Speed Sensor and Circuit

- Turn ignition switch OFF.

Anti-Lock Control Module:

- Disconnect anti-lock brake wiring from anti-lock brake control module.

Breakout Box:

- Connect EEC-IV Breakout Box 014-00322 with Anti-Lock Test Adapter T90P-50-ALA or equivalent to the anti-lock brake wiring plug harness.

- Check resistance between breakout box pins 31 and 49.

- Is resistance between 5 and 100 ohms?

YES -- Go to DD13. DD13 Check Motor Speed Sensor Short to Battery+

NO -- Go to DD8. DD8 Check Pump Motor Speed Sensor