X111 - Check Power-to-A/C Clutch and A/C Clutch Ground Circuits

- Key Off.

- CCRM disconnected.

- Disconnect A/C clutch.

- Disconnect Scan Tool from DLC.

- Measure resistance between Pin 23 of the CCRM vehicle harness connector and the power side of the A/C clutch vehicle harness connector.

- Measure resistance between Pin 16 of the CCRM vehicle harness connector and the ground side of the A/C clutch vehicle harness connector.

- Is each resistance less than 5.0 ohms?

YES -- REPLACE CCRM. RECONNECT all components. RE-EVALUATE symptom.

NO -- SERVICE open circuit. RECONNECT all components. RE-EVALUATE symptom.