TG93 - Check For DTC 0705 With DTC 0707

DTC 0707 indicates the MLP circuit voltage was below the allowed minimum voltage.

Possible Causes:
- Damaged MLP sensor.
- Short to GRND in MLP harness SIG circuit.
- Open in MLP harness SIG circuit.
- Damaged PCM.

- Did DTC 0705 repeat with DTC 0707 during the drive cycle test?

YES -- GO to TG97. TG97 - Check Continuity of the MLP Harness SIG Circuit

NO -- GO to TG94. TG94 - Check For DTC 0705 Generated With DTC 0708