TG92 - Check For DTC 0705

DTC 0705 indicates the MLP sensor circuit voltage was out of the expected range.

- Possible Causes:
- Damaged MLP sensor.
- Open in MLP harness SIG circuit.
- Open in MLP harness SIG RTN circuit.
- Short to GRND in MLP harness SIG circuit.
- Short to PWR in MLP harness SIG circuit.
- Damaged PCM.

- Did DTC 0705 repeat during the drive cycle test?

YES -- GO to TG93. TG93 - Check For DTC 0705 With DTC 0707

NO -- GO to TG96. TG96 - Check For DTC 0707