Turn Signal Switch: Service and Repair

1. Disarm airbag system.
2. Disconnect battery ground cable.
3. Remove center trim panel and steering column lower access cover.
4. Remove steering column lower shroud.
5. Remove upper steering column attaching bolts, then lower steering column to rest on instrument panel brace.

CAUTION: Ensure wires are not pinched when lowering steering column.

6. Remove turn signal switch attaching screws, then remove switch assembly.
7. Carefully pull multi-function lever out of switch, then disconnect switch electrical connectors.
8. Reverse procedure to install. Torque steering column attaching bolts to 17-23 ft lb.
9. Reactivate airbag system.