Rear

1. Remove rear wheel and tire assemblies.
2. Remove rear disc brake caliper and rotor assemblies.
3. Mark control arm and control arm bushings for alignment at installation.
4. Mark trailing arm and crossmember for alignment at installation.
5. Remove stabilizer link assembly.
6. Remove stabilizer bar and bushings.
7. Loosen inner and outer lower control arm attaching bolts.
8. Loosen spindle to strut attaching bolts.
9. Remove parking brake to rear trailing assembly attaching bolt.
10. Loosen trailing arm to strut attaching bolts.
11. Once all control arm and trailing arm attaching bolts are loosened, remove all bolts and remove control arms and trailing arm.
12. Reverse procedure to install.