FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

System Deactivation Procedures

1. Disconnect the positive battery cable.
2. Wait one minute. This is the time required for backup power supply in diagnostic monitor to deplete its stored energy.





3. Remove four nut and washer assemblies retaining driver air bag module to steering wheel. Disconnect driver air bag connector. Connect Rotunda Air Bag Simulator 105-00010 or equivalent to vehicle harness at top of steering column.
4. Remove passenger air bag. The connector will contain the 614 (GY/O) and 616 (PK/BK) circuits. Install Rotunda Air Bag Simulator 105-00010 or equivalent on vehicle harness connector in place of passenger air bag.
5. Connect the positive battery cable.