A25 - Check CKP+ Continuity - Resistance High Fault

^ Key off.

^ Connect CKP sensor tee to CKP sensor and vehicle harness connector.

^ DVOM on 20K ohm scale.

^ Measure resistance between J31 (CKP+ S) and J48 (CKP+ I) at the breakout box.

^ Is resistance less than 2050 ohms?

YES -- Go to A26. A26 - Check CKP- Continuity - Resistance High Fault

NO -- Check connectors, service or replace harness. CKP+ open. Remove all test equipment. Reconnect all components. Clear continuous memory. Rerun quick test.