With Electronic Instrument Cluster (EIC)

1. Set parking brake.
2. Unsnap center molding on left and right sides of instrument panel.
3. Remove steering column cover and column shroud.
4. Remove knobs from auto dim and auto lamp switches, if equipped.
5. Remove 13 screws retaining instrument panel and pull panel out.
6. Move shift lever to 1 position for access.
7. Disconnect electrical connectors from warning lamp module, switch module and center panel switches, if equipped.
8. Remove instrument panel carefully, using caution to not scratch cluster lens.
9. Disconnect electrical connector from front of cluster.
10. Disconnect PRNDL assembly from cluster by carefully bending bottom tab down and pulling PRNDL assembly forward.
11. Pull cluster out and disconnect electrical connectors on rear of cluster.

Instrument Cluster Replacement:

12. Remove instrument cluster.
13. Reverse procedure to install.