Fuel Filler Hose: Service and Repair

REMOVAL and INSTALLATION

1. Remove three filler neck retaining screws and fuel tank filler cap inside fuel filler door.

2. Drain fuel from fuel tank.

3. Raise vehicle.

4. Remove bolt retaining fuel tank filler pipe and fuel tank filler pipe shield to body.

5. Remove clamps securing fuel tank filler pipe to fuel tank.

6. Remove fuel tank filler pipe.

7. To install, reverse Removal procedure. Tighten fuel tank filler pipe and fuel tank filler pipe shield retaining bolt to 4.0-5.6 Nm (36-49 lb in).