Reactivation Procedure

1. Disconnect positive battery cable and back-up power supply (if equipped).
2. Remove the Rotunda Air Bag Simulator 105-00008 or equivalent from the clockspring connector at the base of the steering wheel. Reconnect driver air bag connector. Position driver air bag on the steering wheel and secure with four nut and washer assemblies (10 mm). lighten nut and washer assemblies to 2.7-3.7 N.m (24-34 lb-in).
3. Reconnect positive battery cable and the back-up power supply (if equipped).
4. Prove out system.

WARNING: THE AIR BAG SIMULATOR MUST BE REMOVED AND THE AIR BAG RECONNECTED BEFORE THE SYSTEM IS REACTIVATED.