Dealer Letter
December 18, 1992To:
All Ford of Canada Dealers
Attention:
Dealer Principal
Service Manager
Parts Manager
Subject:
Safety Recall 92S56 - Certain 1992 Model Year Crown Victoria, Grand Marquis, Taurus, Tempo and Topaz Cars for Installation of an Air Bag Warning Instruction Label
In OASIS
YES
Listings
YES
Recall Time Limitation
None
Parts Return
Not Applicable
NOTE:
Return read and circulate these instructions to your Service, Parts and Sales Personnel. They should become familiar with this recall and respond to owner inquires.
Vehicles Affected
VEHICLE LINE ASSEMBLY PLANT PRODUCED THROUGH
1992 Model Year Crown Victoria and Grand Marquis St. Thomas May 20, 1992
1992 Model Year Taurus Atlanta May 13, 1992
1992 Model Year Tempo and Topaz Kansas City June 9, 1992
Reason for Recall
The Air Bag Warning Instruction label in the French language was not installed, behind the driver's sunvisor onto the headliner, on the affected vehicles. Canada Motor Vehicle Safety Standard (CMVSS No. 208) - Seat Belt Installations - requires the manufacturer to have the Instruction label installed on vehicles in both English and French.
Action
To correct this condition, a French language "Air Bag Warning Instruction" label and installation instructions will be mailed to the vehicle owner for installation or, the owner at his/her option may have the dealer service personnel install the label. Labels for vehicles not reported sold on the enclosed listing, will be mailed to the ordering dealer.
If additional labels are required, refer to Attachment II of this bulletin.
Company Contacts: (For dealer use only)
CONCERN NATURE CONTACT ACTIVITY
Technical Technical Assistance Hotline 1-800-665-3577
Claiming Procedures Warranty Claims Hotline for your Region
Owner Concerns Customer Assistance Centre Hotline 1-800-565-3673
General Administrative Christine Murray - Recall Administrator
Telephone (416) 845-2511 Ext. 1495
Facsimile (416) 845-7069
Attachments
Attachment I
^ Administrative Information
Attachment II
^ Labor Allowances
^ Information for Obtaining Additional Labels
Attachment III
^ Technical Instructions