Attachment III - Technical Instructions

NOTE:
Make sure the label is properly positioned before installation. The label adhesive is quick acting and once contact is made with the headliner, relocation may not be possible.

Apply the "Air Bag Warning Instruction" label to the vehicle headliner, onto the area behind the driver's side sunvisor.

To install:

^ turn down driver's side sunvisor toward windshield.

^ locate the label to the headliner with backing strips attached (large exposed portion of backing strip toward the windshield).

^ once label is located, retain the label position by maintaining light pressure on the upper part of the label.

^ carefully fold the label along the backing strip cut line and slowly remove the lower backing material while permitting the label to flow out against the headliner. Smooth out the label from the fold line.

^ slowly remove the upper backing material while permitting the label the flow out against the headliner.

^ smooth out the label against the headliner.





Label Kit Code AA F2UB-15042C70-BB - Driver's Side Only Air Bag





Label Kit Code BB F2AB-5400015-BB - Driver And Passenger Air Bag