Aux. Cluster & Graphic Warning Display Module

1. On models equipped with airbag, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable, then remove console finish panel by prying at bottom edge to disengage retainers.
3. Remove module to console attaching screws, then pull module outward and disconnect electrical connector.
4. Remove module from console.
5. Reverse procedure to install.
6. On models equipped with airbag, rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.