Ignition Lock: Service and Repair

Ignition Lock Replace:

1. Disarm airbag system as described under Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair/Airbag System Disarming.
2. Disconnect battery ground cable.
3. Remove steering wheel as outlined under STEERING WHEEL.
4. Remove steering column lower shroud.
5. Install ignition key, then rotate tumbler while pushing release pin with 0.125 inch drift, Fig. 1.
6. Remove lock from housing.
7. Reverse procedure to install.
8. Reactivate airbag system as described under Air Bags and Seat Belts/Air Bags (Supplemental Restraint Systems)/Service and Repair/Airbag System Disarming.