Clutch Switch: Service and Repair

1. Disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Remove airbag module. Place airbag module on bench with trim cover facing up.
3. Disconnect speed control harness connector.
4. Using a small flat blade screwdriver, pry out horn switches and disconnect horn wires.
5. Remove speed control switches retaining screws.
6. Remove speed control switches and harness assembly.
7. Reverse procedure to install.
8. Reactivate airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.