Recall 93V057000: Ignition Lock Roll Pin Separation

THE ROLL PINS SECURING THE IGNITION LOCK IN THE STEERING COLUMN HOUSING CAN SEPARATE OR MOVE OUT OF POSITION.

THE IGNITION LOCK CYLINDER MAY DISENGAGE FROM THE STEERING COLUMN HOUSING WHICH COULD CAUSE THE STEERING COLUMN TO LOCK UP, RESULTING IN LOSS OF VEHICLE CONTROL AND A POSSIBLE ACCIDENT.

IF ONE OR BOTH OF THE ROLL PINS ARE MISSING OR NOT FULLY INSERTED, THE IGNITION LOCK HOUSING WILL BE REPLACED, ALONG WITH THE DOOR-LOCKS AND THE LIFTGATE OR DECK-LID LOCKS SO THAT KEY COMPATIBILITY IS MAINTAINED. IF BOTH PINS ARE PRESENT AND FULLY INSERTED, A PLASTIC SNAP-ON SLEEVE WILL BE INSTALLED AS A PRECAUTION TO PREVENT THE ROLL PINS FROM COMING OUT.


SYSTEM: STEERING.

VEHICLE DESCRIPTION: PASSENGER CARS.