Attachment II - Labor and Parts Information

ATTACHMENT II

SAFETY RECALL 93S63

ESCORT/TRACER IGNITION LOCK CYLINDER

LABOR ALLOWANCES

Inspect Ignition Lock Cylinder for Loose, Not Flush or Missing Pins

0.3 Hrs. - Insert in Box "A" on Form 1864

Install Plastic Ignition Sleeve if Both Roll Pins are Flush with Lock Cylinder Surface (Includes Inspect Above)

0.3 Hrs. - Insert in Box "B" on Form 1864

Replace Lock Set if Either Roll Pin is Loose, Not Flush or Missing (Includes Inspect Above)

1.3 Hrs. - Insert in Box "C" on Form 1864

Administrative Allowance 0.1 Hrs.

NOTE:
Add 0.1 hour Administrative Allowance to the total repair time.

PARTS REQUIREMENTS





Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.

Parts prices current until next issue of Master Price Book. For latest prices, check or call your:

- Order Processing Center
- DOES II
- Updated Price Book