Ignition Lock Actuator & Steering Wheel Lock Pawl

Fig. 9 Exploded View Of Fixed Steering Column (Part 1 Of 2). Tempo, Topaz & 1989-90 Escort:

Fig. 9 Exploded View Of Fixed Steering Column (Part 2 Of 2). Tempo, Topaz & 1989-90 Escort:

Fig. 10 Exploded View Of Tilt Steering Column. 1989 Tempo & Topaz:

Fig. 11 Exploded View Of Tilt Steering Column. 1990 Escort & 1990-91 Tempo & Topaz:

Removal

1. Remove lock cylinder housing assembly, Figs. 9 through 11, as previously described.
2. Remove ignition switch, lock cylinder and drive gear from housing as outlined.
3. Remove actuator assembly from housing.
4. Remove lock pawl and spring.

Installation

1. Assemble lock actuator spring and lock pawl so that spring engages locating rod of actuator and depression in lock pawl.
2. Install actuator assembly into lock cylinder housing, then install lock gear, new retainer and lock cylinder.
3. Install ignition switch.
4. Install lock cylinder housing assembly to outer tube.