Instrument Cluster - Replacement

Instrument Cluster Removal:

1. On models equipped with airbag, disarm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING
2. Disconnect battery ground cable.
3. Remove retaining screws from bottom of steering column opening and snap steering column cover out.
4. Remove steering column trim shroud, Fig. 4.
5. Remove lower cluster finish panels.
6. Remove cluster opening finish panel screws and pull panel rearward.
7. Disconnect speedometer cable from transaxle.
8. Remove screws retaining cluster and carefully pull cluster rearward enough to disengage speedometer cable.
9. Carefully pull cluster away from instrument panel.
10. Reverse procedure to install.
11. On models equipped with airbag, rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.