Attachment II - Labor and Parts Information
OWNER NOTIFICATION PROGRAM 94M84 AX4S TransaxleLABOR ALLOWANCES
As Required.
Refer to the Labor Time Standards Manual for the Applicable Labor Operation(s) .
NOTE:
THE TOTAL OF PARTS, PARTS MARK-UP, AND LABOR FOR THE REPAIR CAN NOT EXCEED $1300.00.
IF REPAIRS ARE ESTIMATED TO EXCEED $1300, YOU ARE REQUIRED TO INSTALL AN EXCHANGE TRANSMISSION.
IF A REPAIR THAT IS ESTIMATED TO COST LESS THAN $1300.00 IS LATER FOUND TO ACTUALLY COST MORE THAN $1300.00, PRIOR DISTRICT APPROVAL IS REQUIRED. WITHOUT PRIOR DISTRICT APPROVAL, CLAIMS FOR REPAIRS THAT EXCEED $1300.00 WILL BE RETURNED TO THE DEALER.
PARTS ORDERING INFORMATION
AX4S automatic transaxles for 1991 Taurus-Sable-Continental are available as priced Ford Remanufactured assemblies distributed through your facing Ford Authorized Remanufacturer. When calling your F.A.R., order assemblies by Service Part Number from the listing provided.
CLAIMS PREPARATION FOR DEALERS NOT ON ACESII PILOT:
When using a Ford Remanufactured AX4S (AXOD-E) transaxle for a Ford-paid repair, the following information must be included on the 1863 claim form:
1. The cost of the part must be entered.
* Enter the full service part number in the "Part Number" column.
* Enter "Net" in the "Quantity" column.
* Enter the exchange price (from type price list) in the "Amount" column.
* Enter "08" in the condition code column.
2. The handling allowance to cover your handling costs must be entered. Enter ALLOW in the "Basic Part Number" column of the same repair area as the exchange assembly. Enter "NET" in the "Quantity" column. Enter $100 in the "Parts Amount" column.
3. The applicable labor operation must also be entered.
NOTE:
THE REMANUFACTURED TRANSAXLE COST, AND HANDLING ALLOWANCE ARE NOT ELIGIBLE FOR ADDITIONAL PARTS MARK-UP.
CLAIMS PREPARATION FOR DEALERS ON ACESII PILOT:
When using a Ford Remanufactured AX4S (AXOD-E) transaxle for a Ford-paid repair, the following information must be included on the claim:
1. The cost of the part must be entered.
* Enter the full service part number in the "Part Number" column.
* Enter "Net" in the "Key" Field.
* Enter the exchange price (from the price list) in the "Amount" column.
2. The handling allowance to cover your handling costs must be entered. Either the handling allowance of $100 in the MISC. EXPENSE FIELD.
3. The applicable labor operation must also be entered.
NOTE:
THE REMANUFACTURED TRANSAXLE COST, AND HANDLING ALLOWANCE ARE NOT ELIGIBLE FOR ADDITIONAL PARTS MARK-UP.
FCS-700 TAG ISSUANCE
This process is designed to ensure the cores for Ford-paid repairs are picked-up from your dealership as soon as possible. Core pick-up does riot have to wait for your 1863 claim to be submitted and paid. To ensure all Ford paid cores are returned, an FCS-700 tag is sent to you requesting proof of core return to your F.A.R.
You will receive an FCS-700 tag.
Staple your validated ORIGINAL CORE RECEIPT (Yellow top copy) to the FCS-700 tag and return it to the Warranty Parts Return Center before the tag and part due date. If you fail to do this, you will be CHARGED BACK for the entire AX4S (AXOD-E) transaxle repair.
If you receive the FCS-700 tag before your F.A.R. picks up the core, hold the FCS-700 tag until the core is picked-up.
DO NOT RETURN THE CORE TO THE WARRANTY PARTS RETURN CENTER!
After your F.A.R. picks up the core, attach the validated CORE RECEIPT (Yellow top copy) left by your F.A.R. to the FCS..700 tag and mail it to the Warranty Parts Return Center before the tag and part due date.
TECHNICAL INSTRUCTIONS
Refer to the applicable model year Car Service Manual for servicing the AX4S Automatic Transaxle.