With Electronic Instrument Cluster (EIC)

1. On models equipped with airbag, disarm airbag system as outlined under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.
2. Disconnect battery ground cable.
3. Remove two lower trim panels.
4. Remove steering column cover, then PRNDL cable to cluster attaching screws.
5. Pull cluster trim panel rearward, disconnect switch module, then remove trim panel.
6. Remove four cluster attaching screws, then pull cluster bottom rearward.
7. Reach behind and underneath cluster, then disconnect electrical connectors.
8. Pull cluster bottom rearward to remove.
9. Reverse procedure to install.
10. On models equipped with airbag, reactivate airbag system as outlined under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.