Description

TEST DESCRIPTION

The road test is an evaluation of the 4EAT performance. The road test should only be performed when the 4EAT symptom menu directs you here. The road test involves a driving evaluation of the transaxle shifting quality, ability and timing. Shift problems will be directed to a list of symptoms for appropriate actions to take. These symptom menus are given: Upshift, Downshift, and Shift feel for various symptoms encountered.

- Drive the vehicle and attempt to recreate the condition.
- Safety. It is important that the road test is performed with safety issues in mind. Use the provided safety belts and operate the vehicle in a safe manner.
- Two persons should participate in the road test, one to drive the vehicle and another to observe conditions and symptoms.
- Alternatives. In some cases it may not be necessary or desirable to perform an actual road test. The condition may occur at starting, idle or high rpm idle conditions. If this situation applies, proceed with the road test procedure by using the operating condition that applies to your situation.
- If several conditions are found, service them in the order that they occur.
- Begin road test with step SP1.