Front

Description Nm (lb-ft)
Steering Knuckle to Strut Retaining Bolts 93-117 Nm (69-86 lb-ft)
Lower Ball Joint Clamp Bolts 43-54 Nm (32-40 lb-ft)
Brake Caliper Retaining Nuts 39-49 Nm (29-36 lb-ft)
Halfshaft Retaining Nuts 157-235 Nm (116-174 lb-ft)
Tie Rod To Steering Knuckle Retaining Nuts [1] 29-44 Nm (22-33 lb-ft)
Stabilizer Link Retaining Bolts [2] --
Hub to Rotor Retaining Bolts 44-54 Nm (33-40 lb-ft)
Wheel Retaining Nuts 90-120 Nm (65-88 lb-ft)
[1]Tighten to Torque Specification, then continue to tighten to nearest cotter pin slot.
[2]Tighten nut until 10.8mm (0.43 inch) of the bolt threads extend beyond the nut.