Idle Speed/Throttle Actuator - Electronic: Service and Repair

REMOVAL
1. Drain the cooling system.
2. Mark the air and coolant hoses for the ease of assembly, and remove the hoses from the Idle Speed Control-Bypass Air (ISC-BPA) valve.
3. Remove the electrical connector.
4. Remove the attaching bolts.
5. Remove the ISC-BPA valve.

INSTALLATION
1. Position the ISC-BPA and install the attaching bolts.
2. Install the electrical connector.
3. Install the air and coolant hoses.
4. Refill cooling system and check for leaks.