Rear Crankshaft Main Bearing Seal: Service and Repair

FRONT

1. Remove timing belt as outlined under TIMING BELT & COVERS.
2. Remove crankshaft timing belt pulley.
3. remove crankshaft seal using seal remover tool No. T78P-3504-N, or equivalent.
4. Coat seal with oil and install seal using seal installation tool No. T87P-6019-A.
5. Reverse procedure to install.

REAR

1. Remove transaxle assembly.
2. Remove clutch cover and disc, if equipped.
3. Remove flywheel.
4. Remove seal using seal remover tool No. T78P-3504-N, or equivalent.
5. Coat seal with oil and install seal using seal installation tool Nos. T87C-6701-A and T90P- 6701-AH.
6. Reverse procedure to install.