FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Brake Pad: Labor Times

Standard HoursManufacturer Warranty HoursSkill LevelNotes
Replace
Front Pads1.20.0B
Rear Pads2.00.0B
Add the Following Operations After Pads or Shoes Are Removed
Caliper, Renew
Front
One Side0.40.0B
Both Sides0.50.0B
Rear
One Side0.40.0B
Both Sides0.60.0B
Calipers R&R & Overhaul
Front
One Side0.50.0B
Both Sides0.60.0B
Rear
One Side0.60.0B
Both Sides0.90.0B
Front Grease Seal
One Side0.30.0B
Both Sides0.40.0BAdd Any Of The Following Operations If Performed Along With Brakes, Renew.
Hydraulic System Overhaul
Without Rear Disc5.00.0BIncludes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System.
With Rear Disc5.50.0BIncludes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System.
Parking Brake Adjust0.30.0B
Wheel Bearings
Rear
Without Rear Disc
One Side0.40.0BUse The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides0.50.0BUse The Following Operations After Disc Pads Or Brake Shoes Are Removed.
With Rear Disc
One Side0.50.0BUse The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides0.80.0BUse The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Wheel Cylinder & Overhaul
One Side0.80.0B
Both Sides1.30.0B
Wheel Cylinders
One Side0.70.0B
Both Sides0.90.0B
NOTE
To R&R or Renew Rotor, Add
One Side0.40.2B
To Reface Rotor, Add
Front or Rear
One Side0.70.0B
With Locking Lug Nuts, Add
Two Wheels0.20.1B
Four Wheels0.40.2B