| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
Replace |
Front Pads | 1.2 | 0.0 | B | |
Rear Pads | 2.0 | 0.0 | B | |
Add the Following Operations After Pads or Shoes Are Removed |
Caliper, Renew |
Front |
One Side | 0.4 | 0.0 | B | |
Both Sides | 0.5 | 0.0 | B | |
Rear |
One Side | 0.4 | 0.0 | B | |
Both Sides | 0.6 | 0.0 | B | |
Calipers R&R & Overhaul |
Front |
One Side | 0.5 | 0.0 | B | |
Both Sides | 0.6 | 0.0 | B | |
Rear |
One Side | 0.6 | 0.0 | B | |
Both Sides | 0.9 | 0.0 | B | |
Front Grease Seal |
One Side | 0.3 | 0.0 | B | |
Both Sides | 0.4 | 0.0 | B | Add Any Of The Following Operations If Performed Along With Brakes, Renew. |
Hydraulic System Overhaul |
Without Rear Disc | 5.0 | 0.0 | B | Includes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System. |
With Rear Disc | 5.5 | 0.0 | B | Includes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System. |
Parking Brake Adjust | 0.3 | 0.0 | B | |
Wheel Bearings |
Rear |
Without Rear Disc |
One Side | 0.4 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
Both Sides | 0.5 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
With Rear Disc |
One Side | 0.5 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
Both Sides | 0.8 | 0.0 | B | Use The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
Wheel Cylinder & Overhaul |
One Side | 0.8 | 0.0 | B | |
Both Sides | 1.3 | 0.0 | B | |
Wheel Cylinders |
One Side | 0.7 | 0.0 | B | |
Both Sides | 0.9 | 0.0 | B | |
NOTE |
To R&R or Renew Rotor, Add |
One Side | 0.4 | 0.2 | B | |
To Reface Rotor, Add |
Front or Rear |
One Side | 0.7 | 0.0 | B | |
With Locking Lug Nuts, Add |
Two Wheels | 0.2 | 0.1 | B | |
Four Wheels | 0.4 | 0.2 | B | |