Front

Removal



1. Remove door trim panel and watershield. Doors

2. Loosen run attaching nut and screw and washer assembly.

3. Remove glass bracket attaching rivets.

4. Remove upper run screw and washer assembly and lower run attaching nut and washer assembly.

5. Remove glass bracket and run assembly.


Installation

1. Install the glass bracket on the glass run and position the two parts into the door.

2. Loosely install the upper screw and washer assembly. Loosely install lower run attaching nut and washer assembly.

3. Insert the regulator slide into the glass bracket C-channel.

4. Position the glass bracket to the glass. Install attaching rivets or screws. Refer to Door Glass Installation.

5. Lubricate.

6. Position glass in door. Tighten the upper and lower run attaching nuts.

7. Install door trim panel and watershield. Doors