Differential Case

Except Traction-Lok Limited Slip Differential

1. Install replacement ring gear (if removed). Apply suitable locking compound to new bolts and torque to 70-85 ft. lbs.

Traction-Lok Limited Slip Differential

Fig. 9 Pinion Gear Removal & Installation. Ford Traction-Lok:

1. Apply suitable lubricant to clutch plates, then install left side gear, clutch pack and new shim into differential case. Repeat procedure for right hand side.
2. Install pinion gears and thrust washers 180° apart and in contact with side gears.
3. Align gears with pinion shaft bore, Fig. 9, using 12 inch socket extension inserted in pinion shaft rotator.
4. Install ``S'' shaped preload spring into differential using soft faced hammer.