Fuel Pump - Electric

Fuel Pump






Removal

1. Relieve the fuel pressure as follows:
- Remove rear seat cushion.
- Run engine while disconnection fuel pump electrical connector.
- Allow engine to stall. Fuel pressure is now relieved.
2. Remove fuel tank sending unit.
3. Remove fuel filter from pump.
4. Remove two fuel pump wires from sending unit.
5. Remove retaining clamp screw.
6. Remove pump outlet hose clamp.
7. Remove fuel pump from sending unit.

Installation

1. Install fuel pump to sending unit bracket and secure with retaining clamp.
2. Install pump outlet hose and secure with clamp.
3. Connect fuel pump wires to sending unit.
4. Install fuel pump filter.
5. Install sending unit onto fuel tank.