Auxiliary Floor Trim Panel

Removal and Installation
1. Remove snap-on plastic floor anchor covers marked "CHILD SEAT RESTRAINT" using a small screwdriver to pry the cover off of the anchor.







2. Install tether restraint system according to restraint manufacturer's instructions.

WARNING:
^ IT IS IMPORTANT THAT THE BOLT/ANCHOR BE SECURELY TIGHTENED TO THE RESTRAINT MANUFACTURER'S SPECIFICATIONS. OTHERWISE, THE CHILD SAFETY SEAT MAY NOT BE PROPERLY SECURED, AND THE CHILD COULD BE INJURED IN CASE OF A SUDDEN STOP OR ACCIDENT.
^ IF THE ANCHOR BOLTS ARE EVER REMOVED, THE HOLE(S) IN THE FLOOR MUST BE SEALED TO PREVENT THE POSSIBILITY OF FUMES ENTERING THE PASSENGER COMPARTMENT.