Integrated Control Relay Module: Service and Repair

Fan, Motor and Integrated Relay Control Assembly

Removal and Installation

1. Remove radiator sight shield.

2. Disconnect electrical connector. Remove integrated relay control assembly located on radiator support.

3. Disconnect electric fan connector.

4. Unbolt fan/shroud assembly from radiator.

5. Rotate fan/shroud assembly and remove past radiator.

6. Remove fan U-spring retainer from motor shaft and remove fan.

7. Unbolt fan motor from shroud.

8. To install, reverse Steps 1 through 7.

Integrated Relay Control Module:

Integrated Relay Control Assembly

Fig. 41 Cooling Fan Motor Replacement:

Fan and Motor-2.5L13.0L