Safety Belt and Retractor Assembly Removal

(Refer to Figure 4)

1. Using Seat Belt Bolt Bit No. T77L-2100-A, or equivalent, remove the lower bolt retaining the safety belt anchor to the floor sill assembly.

2. Slide the safety belt through the slot in the upper trim panel.

3. Remove the bolt retaining the safety belt retractor assembly to the "B" pillar assembly.

4. From inside the vehicle, rotate the comfort regulator housing and remove it front the "B" pillar. Refer to Figure 4 and View A.

5. Remove the safety belt and retractor assembly from vehicle.