Seat Back and Seat Cushion Installation

(Refer To Figures 1 And 2)

1. Install the rear seat cushion and the rear seat back assembly as follows.

2. Position the seat back assembly into the vehicle so that the hanger wire is fully engaged in the package tray slots.

3. Install the seat back lower retaining bolts and tighten securely.

4. Position the seat cushion assembly into the vehicle.

5. Position the rear occupant safety belt buckles and the centre occupant lap belt on top of the cushion.

6. Apply knee pressure to the lower portion of the seat cushion assembly. Push rearward and down to lock seat cushion into position.

7. Check rear seat cushion to ensure it is secured into floor retainer.

IMPORTANT
Mutilate and scrap all replaced safety belt and retractor assemblies.