Transmission Control Systems
Testing and Inspection- Test Description and Procedure
- Quick Test 1.0 - Visual Inspection
- Quick Test 2.0 - Equipment Hookup (Analog Volt/Ohm Meter)
- Quick Test 2.0 - Equipment Hookup (MIL Equipped Vehicles)
- Quick Test 2.0 - Equipment Hookup (Non-MIL Equipped Vehicles)
- Quick Test 3.0A - Key On Engine Off Self-Test
- Quick Test 3.0B - Service Code Chart
- Quick Test 4.0A - Engine Running Self-Test
- Quick Test 4.0B - Service Code Chart
- Quick Test 5.0A - Continuous Self-Test
- Quick Test 5.0B - Continuous Self-Test
- Quick Test 5.0C - Continuous Self-Test
- Quick Test 6.0 - Switch Monitor Test