RH Front Door Window Switch

Removal and Installation






1. Remove screw from the front end of the bezel and lift bezel and switch away from the armrest.
2. Remove bezel and nut from the mirror remote control, if so equipped.
3. Remove two retaining nuts from the bezel studs and separate the switch from the bezel.
4. Pull the switch from the switch connector.
5. To install, position the switch to the connector and press together firmly.
6. Position the switch to the bezel and install the two retaining nuts.
7. Install the bezel and nut on the outside mirror remote control, if so equipped.
8. Position the switch and bezel to the armrest and install the retaining screw.