Liftgate Wiper/Washer

WIPER DOES NOT WORK
1. Check circuit breaker and Fuse 6.
2. Separate C362. Check for power on R wire with ignition ON. Reconnect C362 and separate C217. Check for power on W wire with ignition and wiper switch on. If power is missing, check wires back to wiper switch. Check for continuity to ground at BK wire.
3. If continuity OK, replace motor.
4. Remove C362 from Liftgate Wiper/Washer Control. Remove control from instrument panel. Check continuity of switch sections. Repair or replace control if bad.