Brake Pad: Labor Times

	Standard Hours	Manufacturer Warranty Hours	Skill Level	Notes
Replace
Front Pads	1.2	0.0	B
Add the Following Operations After Pads or Shoes Are Removed
Caliper, Renew
Front
One Side	0.4	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides	0.5	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Calipers R&R & Overhaul
Front
One Side	0.5	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides	0.6	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Front Grease Seal
One Side	0.3	0.0	B
Both Sides	0.4	0.0	B	Add Any Of The Following Operations If Performed Along With Brakes, Renew.
Hydraulic System Overhaul
Without Rear Disc	5.0	0.0	B	Includes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System.
Parking Brake Adjust	0.3	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Rear Wheel Bearings
Without Rear Disc
One Side	0.4	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides	0.5	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
With Rear Disc
One Side	0.5	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides	0.8	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Wheel Cylinder & Overhaul
One Side	0.8	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides	1.3	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Wheel Cylinders
One Side	0.7	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.
Both Sides	0.9	0.0	B	Use The Following Operations After Disc Pads Or Brake Shoes Are Removed.