| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Front Pads | 1.2 | 0.0 | B | |
| Front & Rear | 2.4 | 0.0 | B | |
| Rear Pads | 1.2 | 0.0 | B | |
| Add the Following Operations After Pads or Shoes Are Removed |
| Caliper, Renew |
| One Side | 0.4 | 0.0 | B | Use Any Of The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Both Sides | 0.5 | 0.0 | B | Use Any Of The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Calipers R&R & Overhaul |
| One Side | 0.5 | 0.0 | B | Use Any Of The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Both Sides | 0.6 | 0.0 | B | Use Any Of The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Front Grease Seal, Renew |
| One Side | 0.4 | 0.0 | B | |
| Both Sides | 0.5 | 0.0 | B | |
| Hydraulic System Overhaul | 5.0 | 0.0 | B | Includes: Overhaul Calipers, Wheel Cylinders & Master Cylinder. Drain, Flush, Refill & Bleed System. |
| Parking Brake Adjust | 0.2 | 0.0 | B | Use Any Of The Following Operations After Disc Pads Or Brake Shoes Are Removed. |
| Wheel Bearings, Renew |
| Front |
| One Side | 0.4 | 0.0 | B | |
| Both Sides | 0.7 | 0.0 | B | |
| NOTE |
| To R&R or Renew Rotor, Add |
| One Side | 0.3 | 0.0 | B | |
| To Reface Rotor, Add |
| Front or Rear |
| One Side | 0.7 | 0.0 | B | |
| With Locking Lug Nuts, Add |
| Two Wheels | 0.2 | 0.1 | B | |
| Four Wheels | 0.4 | 0.2 | B | |
| With Locking Wheel Covers, Add | 0.2 | 0.1 | B | |