Labor and Parts Information - Attachment II
ATTACHMENT IIEmissions Recall 91E13
LABOR ALLOWANCE
INSPECTION
Inspect the Exhaust System Catalyst and, if necessary, Replace the Catalyst Assembly; Prepare and Attach the Authorized Modifications Decal.
Inspection of the Catalyst and Attachment of the Decal:
0.2 Hrs. - Insert in Box "A" on Form 1864
INSPECTION AND PEPLACEMENT
Inspection and Replacement of the Exhaust System Catalyst, Attachment of the Authorized Modifications Decal (Includes Time to Prepare Removed Catalyst for Return):
Kit Code "A" (I.S. # 8053) . . . . 0.7 Hrs.
Kit Code "B" (I.S. # 8054) . . . . 1.1 Hrs.
Kit Code "C" (I.S. # 8055) . . . . 1.0 Hrs.
Insert the Appropriate Time in Box "B" on Form 1864
Note:
Add 0.1 Hour Administrative Allowance to the total repair time.
PARTS REQUIREMENTS
Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.
PART
NUMBER DESCRIPTION CLASS PRICE
Kit, Exhaust System Catalyst Replacement
E8ZZ-5E212-D Kit Code "A", 2.3L Mustang VG $215.00
F1ZZ-5F250-B Kit Code "B", 5.0L Mustang VG 225.00
F1LY-5F250-B Kit Code "C", 5.0L Mark VII VG 225.00
Part prices are current until the next issue of the Master Price Book. For the latest price(s), call an Order Processing Center or check an updated Master Price Book or DOES II.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Parts and Service Division in accordance with Policy Procedure Bulletin 4000.
PARTS RETURN INSTRUCTIONS
REMOVED CATALYSTS MUST BE RETURNED.
REMOVE EXCESS WEIGHT FROFI THE CATALYSTS BY CUTTING AND DISCARDING PIPES/FLANGES AS CLOSE TO THE CATALYST SHELL AS PRACTICAL.
THE FPS-700 TAG WILL BE SENT TO YOU FOR EACH VEHICLE SERVICED. REFER TO WARRANTY AND POLICY MANUAL SECTION 7.0, PAGES 7 AND 10. HOLD REMOVED CATALYSTS UNTIL THE FPS-700 TAG IS RECEIVED.
FAILURE TO RETURN REMOVED CATALYSTS WILL RESULT IN CLAIM CHARGEBACK.
RETURN CATALYSTS VIA UNITED PARCEL SERVICE (UPS) TO THE ADDRESS ON THE FPS-700 TAG. CLAIM FOR PREPAID FREIGHT ON DWE USING FORM 1863.
ANY QUESTIONS REGARDING THE HANDLING OF REMOVED CATALYSTS SHOULD BE RESOLVED WITH YOUR SERVICE ZONE MANAGER.