Removal and Installation
WITH DIESEL ENGINE1. Remove drive belts.
2. On vehicles with air conditioning, remove alternator.
3. On vehicles with air conditioning, remove both braces from support bracket.
4. Disconnect power steering lines and drain fluid from pump.
5. Remove four bracket mounting bolts.
6. Install pulley removal tool No. T69L-10300-B or equivalent on pulley hub. Hold small hex head of tool and turn tool nut counterclockwise to remove pulley.
7. Remove pump from bracket.
8. Reverse procedure to install.
Tempo & Topaz
1. Remove alternator drive belt.
2. Place alternator in upper most position.
3. Remove radiator overflow bottle.
4. Remove power steering pump drive belt.
5. Disconnect return line from pump.
6. Completely back off power steering pump pressure line nut. The pressure line will separate when the pump bracket is removed.
7. Remove power steering pump mounting bolts and pump.
8. Reverse procedure to install.