Manual Revision - Door, Hinge and Weatherstrip Removal
84ford2Article No. 84-24-8
SHOP MANUAL - REVISION - 1985 CAR SHOP MANUAL "B", GROUP 44 - SECTION 06 - PAGES 3 & 4, DOOR, HINGE AND WEATHERSTRIP - REMOVAL AND INSTALLATION - DOOR - HINGE PIN (BODY SIDE HINGE)
FORD 1985 MUSTANG
LINCOLN-MERCURY 1985 CAPRI
Removal and installation - Mustang/Capri - body side hinge-pin. In the service procedure test, steps 5, 6, 7 & 8 are out of sequence. It is necessary to break the hinge pin before removal. Insert the following steps to correct the current published procedure.
5. Break the upper hinge pin in half, using bolt cutter or similar tool (hammer and chisel, if necessary) for easier removal.
6. Remove upper hinge pin pieces.
7. Break the lower hinge pin in half, using bolt cutters or similar tool (hammer and chisel, if necessary) for easier removal.
8. Remove lower hinge pin pieces.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"