Strut

1. Place ignition switch in the unlocked position.
2. From engine compartment, remove upper shock absorber mounting nut.
3. Raise front of vehicle and support lower control arms. Position safety stands under frame jacking pads located rearward of wheels.
4. Remove wheel and tire assembly.
5. Remove caliper, rotor and dust shield.
6. Remove two bolts attaching shock absorber to spindle.
7. Lift strut upward from spindle to compress rod, then pull downward and remove shock absorber.
8. Remove jounce bumper, if equipped.
9. Reverse procedure to install. Torque upper mounting nut to 55-92 ft lb. Torque lower mounting nuts to 120-179 ft lb.