Front Crankshaft Seal: Service and Repair

To gain access to the front engine seals, remove the timing belt cover and proceed as follows:

CRANKSHAFT OIL SEAL
1. Without removing cylinder front cover, remove crankshaft sprocket with tool T74P-6306A.
2. Remove crankshaft oil seal with tool T74P-6700B.
3. Install a new crankshaft oil seal with tool T74P-6150A.
4. Install crankshaft sprocket with recess facing engine block.

CAMSHAFT & AUXILIARY SHAFT OIL SEALS
1. Remove camshaft or auxiliary shaft sprocket with tool T74P-6256A.
2. Remove oil seal with tool T74P-6700B.
3. Install a new oil seal with tool T74P-6150A.
4. Install camshaft or auxiliary shaft sprocket with tool T74P-6256A with center arbor removed.