AR03.10-P-6111-06SXI Install and Gauge Connecting Rod Bearings

AR03.10-P-6111-06SXI Install and Gauge Connecting Rod Bearings











1 Clean bearing points of connecting rod, connecting rod bearing caps and connecting rod bearing journals with a chamois leather.

Never use hard objects for cleaning to prevent damage.

Blow through oil ducts in direction of flow oil with compressed air.

2 Install connecting rod bearing cap with connecting rod bearing shells.
3 Lubricate thread and bolt head contact surface of connecting rod bolts with engine oil.





4 Screw in connecting rod bolts and tighten according to the tightening instructions.

The connecting rods are cracked (broken). The dimensional accuracy of the connecting rods can no longer be guaranteed, therefore new connecting rods must be fitted following removal. Otherwise engine damage can occur. The connecting rods are supplied with assembly screws, which must be replaced by connecting rods with assembly clamps to prevent loosening.